Side Spray Anti-Blowing Flat Bag Factory Central Dust Removal System

Side Spray Anti-Blowing Flat Bag  Factory Central Dust Removal System

The BMC-type sub-chamber side spray anti-blowing flat bag dust collector has the advantages of compact structure, simple and reliable cleaning method, convenient bag replacement and maintenance, high dust collection efficiency and long life. Especially because it adopts the three-phase reverse blower to clean the ash, not only the structure is simple, but also the clean air is used to clean the ash, and there is no need to set up another mechanism to introduce the blowback source. This saves energy and is easy to operate, which is significantly extended The life of the filter bag is improved. Reliable operation can be achieved.

Clean air box: there is a blowing pipe inside and a clean air outlet on the upper part. The front is an inspection door. After opening the inspection door, you can easily change any filter bag;

Dust gas: The dust gas inlet is located in the upper part of the clean air box, and the box is equipped with a filter bag; the ash hopper part: After the dust enters the dust gas box, the clean air passes through the filter bag to the clean air box. The dust will settle into the ash hopper And the direction of settlement is consistent with the direction of airflow, which is conducive to the settlement of dust. There is a partition between the clean air box and the dust air box, so the size of the filter bag should be a rectangular flat filter with a length of 1200mm, a width of 480mm and a thickness of 26mm. Bag; reverse blowing: the reverse blowing is installed under the clean air box, including air bags, pulse valves, pulse controllers, etc.

BMC type sub-chamber side spray anti-blowing flat bag dust collector structure composition:

The whole equipment includes five parts: clean air box, dust air box, ash hopper, blowing device and bracket.

1. Clean air box part: This part is equipped with a blowing pipe, and the upper part has a clean air outlet. The front is an inspection door. When the inspection door is opened, any filter bag can be easily changed.

2. Dust and gas part: The dust and gas inlet is located in the upper part of the air box, and the box is equipped with a filter bag.

3. Ash bucket part: After the dust enters the dust air box, clean the air and empty the filter bag to the clean air box. The dust will settle into the ash bucket. And the direction of settlement is consistent with the direction of airflow, which is conducive to the settlement of dust. There is a partition between the clean air box and the dust air box.

4. Anti-blowing device: installed under the clean air box, including air bag, pulse valve, pulse controller, etc.

Outstanding advantages of the BMC type sub-chamber side spray anti-blowing flat bag dust collector:

Due to the use of three-phase reverse air blowing to clean the dust, the pulse bag dust collector is not only simple in structure, but also uses the inhaled clean air to clean the dust. There is no need to set up another mechanism to introduce the reverse blowing source, which saves energy and is simple to operate. Extend the life of the filter bag, so as to achieve and reliable operation.

The working principle of BMC type sub-chamber side spray anti-blowing flat bag dust collector:

The dust collector is generally operated under negative pressure. After the dust-containing air is sucked into the dust collector through the dust gas, it will diffuse into the entire volume of the dust air box. The clean air passes through the filter bag, passes through the venturi at the mouth of the filter bag to the clean air box, and then is discharged through the clean air outlet. Dust will be prevented from outside the filter bag, part of the dust can fall into the ash hopper by gravity, and another part will be attached to the filter bag. After a large amount of dust adheres to the filter bag, it will increase the resistance of the equipment. To keep the equipment running normally, filter the dust on the bag regularly.


The BMC type sub-chamber side spray anti-blowing flat bag dust collector adopts the pulse counter-blowing system. Compared with mechanical vibration cleaning or low-pressure counter-blowing dust removal, this method has a much better dust removal effect. There are no moving components and can greatly Reduce maintenance workload.

Company Informations :


 
  Our Hebei Feixiang Environmental protecton Equpment co.,ltd is a comprehensive enterprise located in Botou City, Cangzhou, Hebei Province, which integrating research, design, manufacturing, installation and after-sales service. It has a good location advantage and industry deposit, with developed transportation and superior geographical location.
  We produces all kinds of stand-alone dust removal equipment, bag type dust  equipment, boiler and kiln industry dust removal equipment, cement mining industry dust removal equipment, steel industry dust removal equipment, wet electrostatic dust removal equipment, flue gas desulfurization and denitrification equipment, UV photo-oxygen plasma purification equipment, welding Smoke purifiers, dust collector bags, skeletons, unloaders, pulse valves, conveyor equipment and other products.
  Our company has strong technical force, strict quality management, excellent manufacturing, and after-sales service is popular all over the world. It has established long-term and stable cooperation with customers. Our company also cooperates with a number of domestic scientific research institutions to maintain a leading level in product research and development and the application of new technologies.
  Our tenet: product quality first, integrity first, we are committed to the research and development of environmental equipment, improve our own quality, enhance our market competitiveness, and win the future with people with lofty ideals! !

Why choose us ?



1.The prfessionally service with the best quality and competitive price will be supplied from our team ,

2.We can design for customer and customized products base on customer requirements.

3.Our professional team can help customers install and debug equipment,

4.We can help customers train operators,

5.When customers need, we can provide equipment repair parts at any time

FAQ :

Q: Are you manufacturer or trading company?
A: We are the professional manufacturer and exporter with 20 years production experience.

Q: Where is your factory located? How can I visit there?
A: Our factory is located in Botou City, Cangzhou ,Hebei Province, near to Shijiazhuang city . Warmly welcome to visit us anytime.
Q: How do you control the quality?
A: We insist that "Quality First, Customer First", and always pay attention to quality control from the beginning to the end. One year warranty period, ISO9001:2008, CE, Certificates. 
Q: How do I pay for the product?
A: T/T, L/C, Western Union, Money Gram,Credit Card are available.
Q: How long is the delivery time?
A: About 10-40 days upon the payment date.
Q: How about the after-sale installation of dust collector?
A: Our products are modelized. You can easily assemble them with our instrustions. We provide installation manual, technical consulting forever. Our engineers are available to help you install dust collector online. We also can provide installing turn-key projects overseas