UF- (STD, FM, FB) Series Single - Machine Bag Dust Collector Direct Supply by Manufacturer

UF- (STD, FM, FB) Series Single - Machine Bag Dust Collector Direct supply by manufacturer

This kind of dust collector in domestic by other single dust collector, its characteristic is shaking clear grey swing device soot cleaning ability is stronger, the inlet concentration is bigger, up to 100 g/Nm3, go out emission concentration of 100 g/Nm3, dust removal efficiency can reach 99.9%, is economical and practical, compact structure, easy installation, maintenance is convenient wait for a characteristic, it is mainly used for various libraries and all kinds of top, bottom, warehouse top conveying equipment such as partial discharge and dust dust removal purification. At the same time, it is also suitable for dust removal of local dust points in other industries.


The dust collector can be designed in various forms, which can be used by a single machine or by multiple units, and can be used by large and small air volumes. Multi-unit timing, can also be used for small ball mill, crusher and other continuous working point as dust removal equipment. Compact structure, small size, low height, suitable for plant and equipment installation, also can be installed outside. The factory can also provide corrosion resistance and high temperature resistant structure, to meet the needs of different users.



1, filter condition: dust gas from the air inlet into the hopper (type A) or grey box (C) or directly through the plate hole (B) different ways into the filter bag, coarse particle due to gravity and inertia settlement in the hopper, grey box, warehouse, tiny dust in bag filter bag resistance wall, net gas flow through the filter bag to the duct, is pumped fan out into the atmosphere.

2. Ash cleaning condition: With the progress of filtration condition, the dust trapped on the inner surface of the filter bag gradually increases, and the airflow resistance also gradually increases. When it reaches a certain resistance value (such as 1500Pa), the dust should be cleaned regularly to make the dust collector work continuously. It can be manually or automatically controlled according to the needs. First, shut down the exhaust fan, then open the shaking device to shake the dust filter bag to clear the dust and shake off the dust inside the bag. When the resistance drops to a certain value (such as 1000Pa), the ash cleaning shall be stopped manually or automatically and the exhaust fan shall be restarted. The dust collector enters the filtration state again, and so on.
Structural characteristics of

The single-machine bag dust collector is composed of the following components:

1. Filter box: the filter box includes the shell, flower plate, internal filter bag, bag hook and access door.

2. Shake and shake ash clearing swing device: including swing motor, connecting rod structure and swing, swing axis, etc.

3, fan part: including the exhaust fan and belt transmission device, motor, air outlet pipe.

4. Air inlet and ash discharge parts: divided into three types according to installation type:

Type A: the lower part of the filter box is connected with ash hopper and ash discharging valve, and is provided with A pillar. The air inlet is located on the upper part of the dust hopper.

Type B: It is open at the bottom of the filter box as air inlet and air outlet. Flange is provided beside the flower plate.

Type C: the lower part of the filter box is provided with ash storage box, and the upper part of the ash box is provided with air inlet. [1]

The main parameters

Specification: The single dust collector has 2, 3, 4, 5, 6 and 7 specifications.

Installation type: 2, 3 and 4 have three types of installation type: A, B and C; 5, 6 and 7 are available in type A and B for each type
Company Informations :


 
  Our Hebei Feixiang Environmental protecton Equpment co.,ltd is a comprehensive enterprise located in Botou City, Cangzhou, Hebei Province, which integrating research, design, manufacturing, installation and after-sales service. It has a good location advantage and industry deposit, with developed transportation and superior geographical location.
  We produces all kinds of stand-alone dust removal equipment, bag type dust  equipment, boiler and kiln industry dust removal equipment, cement mining industry dust removal equipment, steel industry dust removal equipment, wet electrostatic dust removal equipment, flue gas desulfurization and denitrification equipment, UV photo-oxygen plasma purification equipment, welding Smoke purifiers, dust collector bags, skeletons, unloaders, pulse valves, conveyor equipment and other products.
  Our company has strong technical force, strict quality management, excellent manufacturing, and after-sales service is popular all over the world. It has established long-term and stable cooperation with customers. Our company also cooperates with a number of domestic scientific research institutions to maintain a leading level in product research and development and the application of new technologies.
  Our tenet: product quality first, integrity first, we are committed to the research and development of environmental equipment, improve our own quality, enhance our market competitiveness, and win the future with people with lofty ideals! !

Why choose us ?



1.The prfessionally service with the best quality and competitive price will be supplied from our team ,

2.We can design for customer and customized products base on customer requirements.

3.Our professional team can help customers install and debug equipment,

4.We can help customers train operators,

5.When customers need, we can provide equipment repair parts at any time

FAQ :

Q: Are you manufacturer or trading company?
A: We are the professional manufacturer and exporter with 20 years production experience.

Q: Where is your factory located? How can I visit there?
A: Our factory is located in Botou City, Cangzhou ,Hebei Province, near to Shijiazhuang city . Warmly welcome to visit us anytime.
Q: How do you control the quality?
A: We insist that "Quality First, Customer First", and always pay attention to quality control from the beginning to the end. One year warranty period, ISO9001:2008, CE, Certificates. 
Q: How do I pay for the product?
A: T/T, L/C, Western Union, Money Gram,Credit Card are available.
Q: How long is the delivery time?
A: About 10-40 days upon the payment date.
Q: How about the after-sale installation of dust collector?
A: Our products are modelized. You can easily assemble them with our instrustions. We provide installation manual, technical consulting forever. Our engineers are available to help you install dust collector online. We also can provide installing turn-key projects overseas